b

Home Page
Decoratives
Wood Finishes
Primers & Undercoats
Preservatives
Thinners
Brushes
Ancillaries
Related Sites

Multilac Weather Guard TOUGH EXTERIOR EMULSION PAINT Weather Guard is a high quality exterior use wall paint based on styrene modified acrylic copolymer Emulsion resin. It gives a luxurious finish with a sheen which has excellent resistance to dirt pickup. It is easy to apply. Also it has very good washability. It contains weather resistant light fast pigments with fungus and mould retarding additives, to protect the wall applied for years. Field of Application : It can be used outdoors on various types of dry surfaces such as walls bricks, hardboards, building boards, concrete, new or previously painted. TECHNICAL DATA Drying time : Surface dry 15 minutes, Hard dry 30 minutes Thinner : Clean water Dilution : Coat Paint Water 1st 1 Part 1 Part 2nd 2 Part 1 Part Covering capacity : 14 - 15 Sq.m / Litre (depending on surface) Specific gravity : Approximately 1.33 (depending on shade) Solid contents : 50 - 55 % by weight (depending on shade) Method of Application : Preferably by brush or roller. Can also be sprayed. Flash point : Non flammable Shades : Refer our colour card. Additional colours as per customers specs can be supplied on request. Cleaning : Brushes and other tools must be cleaned with water immediately. Packing : 1 Litre and 4 Litres attractive lithographed cans and 200 Litres drums. Storage : Store at room temperature between 20° C - 40° C. Directions for use : To be stirred well before use. The surface to be painted should be clean (wire-brush off fungus and mould, wash with fungicide solution or bleach, remove loose paint, rust and other residue with coarse sand paper or scraper) fill cracks and holes with acrylic wall filler. The moisture content in the surface should not be more than 10 %. Surface preparation : Please refer to our separate detailed instructions on surface preparation and priming for water based paints.

Designed and Hosted by Lankagate.Com